What did you do to your Hellcat today?

[ChargerChallenger]

Nothing. OTR truck driver. I'm out 2-3 weeks. All I can do is get annoyed by y'all giving TLC to your HC's. 😣😂

I stare at my pics on my phone. 😳 Is that normal? What's wrong with me? 😪
View attachment 11099

Nothing your a Genius look at Einstein

 

[ChargerChallenger]

And another thing lol thank you ZL1 Addons

 

[Diboblo]

Installed my freshly embroidered Hellcat headrests!

Black on black, for a subtle look.

Since, on the Charger, the headrests are the same, I've installed them facing out. If I feel like a change, I can swap sides and have them facing toward each other

They will look like hell, when you re-install them. You will need a hair dryer, or a heat gun, on LOW, to heat and stretch them, to get rid of any wrinkles. Works like a charm. I'll probably go back and hit them, with the heat gun, one more time, but they came out great!

These were done by my patch vendor, so they took a couple of weeks, but worth the wait!

Bob
Riverside, California

 

[Hunter]

Installed my freshly embroidered Hellcat headrests!

Black on black, for a subtle look.

Since, on the Charger, the headrests are the same, I've installed them facing out. If I feel like a change, I can swap sides and have them facing toward each other

They will look like hell, when you re-install them. You will need a hair dryer, or a heat gun, on LOW, to heat and stretch them, to get rid of any wrinkles. Works like a charm. I'll probably go back and hit them, with the heat gun, one more time, but they came out great!

These were done by my patch vendor, so they took a couple of weeks, but worth the wait!

Bob
Riverside, California

Bad a**!

 

[Stormtrooper1320]

Installed my freshly embroidered Hellcat headrests!

Black on black, for a subtle look.

Since, on the Charger, the headrests are the same, I've installed them facing out. If I feel like a change, I can swap sides and have them facing toward each other

They will look like hell, when you re-install them. You will need a hair dryer, or a heat gun, on LOW, to heat and stretch them, to get rid of any wrinkles. Works like a charm. I'll probably go back and hit them, with the heat gun, one more time, but they came out great!

These were done by my patch vendor, so they took a couple of weeks, but worth the wait!

Bob
Riverside, California

Those do look really well done.

 

[Diboblo]

Thanks guys!

I appreciate the good words


Bob
Riverside, California

 

[BULL]

Thanks guys!

I'm going to start a thread, in my vendor section, for this service.

Keep an eye out!



Bob
Riverside, California

PM coming

 

[Hellcatcfp]

Nothing. OTR truck driver. I'm out 2-3 weeks. All I can do is get annoyed by y'all giving TLC to your HC's. 😣😂

I stare at my pics on my phone. 😳 Is that normal? What's wrong with me? 😪
View attachment 11099

This explains it.

 

[Purerock105]

Sunny and 75 virtually the whole time I was gone. I get home. Rainy and 60. Ugh! 😠

Took HC out once before rain yesterday. DSRT getting wet because cover is off, because I need to drive it. Taking off cover while raining or shortly thereafter is pointless, and you will get wet.

DAMN YOU TO HELL, MOTHER NATURE!!!😂

 

[Purrfect]

Swapped a Demon drive shaft into my ‘16 today.
Simple straight forward swap,and smooth as butter.Just wanted the extra piece of mind.

 

[Purerock105]

Swapped a Demon drive shaft into my ‘16 today.
Simple straight forward swap,and smooth as butter.Just wanted the extra piece of mind.
View attachment 11623

Nice. How's that lift? Is that "Quick Jack". Saw YT wrencher 'Sarah-n-Tuned' get them. Might have to put that on future wish list.

 

[Decay]

Swapped a Demon drive shaft into my ‘16 today.
Simple straight forward swap,and smooth as butter.Just wanted the extra piece of mind.
View attachment 11623

Nice lift!

 

[Purrfect]

Nice. How's that lift? Is that "Quick Jack". Saw YT wrencher 'Sarah-n-Tuned' get them. Might have to put that on future wish list.

Thanks!
It is a Quick jack,and I love it for my short ass garage lol
Just not enough space for a 4 post...

 

[Hickster]

Cried, damn thing was detailed nicely and here comes the mist, piss, and cold wind and rain. Living on the Gulf this time of year, no telling. Can't even put the damn thang up before it is ruined. Start over on Sunday.

 

[hellno]

Removed the from sway bar and links , the exhaust system, installed cat deletes with 12 in ch turn downs removed passenger and rear seats , subwoofer ,drained the tank and added pro e85 and it’s now loaded on the trailer for testing tomorrow in holly springs ms ,

 

[Diboblo]

Dropped in a pair of JBL GX693 speakers, in the rear deck, to replace the failed OEM's.

No pix, but sounds 10x better. These are 3 way, instead of 2 ways, so I get brighter imaging and they don't buzz, or rattle, with bass.

100 watts, each.

2.3 ohms.

Bob
Riverside, California

 

[BULL]

View attachment 11629 Removed the from sway bar and links , the exhaust system, installed cat deletes with 12 in ch turn downs removed passenger and rear seats , subwoofer ,drained the tank and added pro e85 and it’s now loaded on the trailer for testing tomorrow in holly springs ms , View attachment 11627 View attachment 11628

Weren't you going to do tshirts?

 

[Decay]

Did my 500 mile oil change.
Forward plastic is kind of a PITA for this much oil.

 

[16GoManGoHC2]

Finally finished the killer chiller installation and charged it this am. 40F coolant temp idling in 75 degree garage, yes door was open, car puts out some heat. ran it 10 minutes after completing the charge and it ran out of gas, knew it was low but not that low, E means empty on this things for sure lol!!
Look, except for the insulated coolant lines one would never know it’s there, even the drag valve is out of sight. What a BITCH making it all neat, tidy, and factory looking. Can’t wait to get it out on the road and see what it gets coolant down too.

 

[BULL]

Finally finished the killer chiller installation and charged it this am. 40F coolant temp idling in 75 degree garage, yes door was open, car puts out some heat. ran it 10 minutes after completing the charge and it ran out of gas, knew it was low but not that low, E means empty on this things for sure lol!!
Look, except for the insulated coolant lines one would never know it’s there, even the drag valve is out of sight. What a BITCH making it all neat, tidy, and factory looking. Can’t wait to get it out on the road and see what it gets coolant down too.
View attachment 11689

If you care to, and you took enough pictures, you should do a dedicated thread on the installation of this. It might be a good thread to put in the WIKI.